...
pdf
 
back to overview

This products is listed in this product group:

 

DRY CHAIN LUBE 300ML
JMC - SPARE NOZZLE 5540166

KETTENSPR TROCK 300ML JMC
H220
Extremely flammable gas.
H222
Extremely flammable aerosol.
H225
Liquid and vapor highly flammable.
H229
Container is pressurized: may burst if heated.
H280
Contains gas under pressure; may explode if heated.
H304
May be fatal if swallowed and enters airways.
H315
Causes skin irritation.
H317
May cause allergic skin reactions.
H336
May cause drowsiness and dizziness.
H411
Toxic to aquatic organisms, with long lasting effects.
JM-No.:
714.00.02
Product:
DRY CHAIN LUBE 300ML
JMC - SPARE NOZZLE 5540166
Retail price:
-
Add to basket:
Retail price:
-
KETTENSPR TROCK 300ML JMC

Description


JMC Chain Spray Dry


 


Fully synthetic, light-coloured, strongly adhesive special lubricant with additives against ageing, corrosion and wear. The high PTFE solids content ensures a grease-free sealing of the entire surface.


 


Performance:



  • Recommended for O-ring and X-ring chains.

  • Excellent adhesion, no dripping or spinning off

  • Economical in use

  • Wax-like dry film, therefore no adhesion of dirt

  • Water repellent, extreme protection against corrosion

  • Excellent damping properties

  • Excellent creep and penetration properties

  • Very stable to ageing, also to aggressive media

  • Low friction values, low wear

  • Extremely UV resistant


 


Range of application:



  • For lubrication of all chains, sliding surfaces, splined shafts, cardan and universal joints, spindles, guides and gears.

  • Use especially in dusty environments


 


Application:


Shake well before use. Surfaces should be dry and free of dust and grease. Apply the dry chain spray thinly. Spray again thinly after approx. 2 minutes. Allow to dry very well before loading.


 


 


Content: 300 ml spray can


Packaging unit: 12